Spray Foam Insulation Cost Calculator

Leading provider of insulation estimating.

Spray foam insulation costs $2.00 to $5.50 per square foot of surface area installed, depending on the project size, conditions, location, and whether it is open-cell or closed-cell foam.
Square feet Average installed cost
100 $200 – $550
200 $400 – $1100
300 $600 – $1,650
400 $800 – $2,200

Are you a Homeowner?

Want to Hire Spray Foam Insulation Contractor?

Spray Foam Insulation Cost in Florida

For spray foam insulation near me in Florida, costs range from $2.00 to $5.40 per square foot installed in 2025, depending on foam type, thickness, and project size. A typical 1,000-square-foot attic might cost $2,000-$5,400, reflecting rising material and labor expenses. Here’s the breakdown:

  • Foam Type: Open-cell foam runs $0.72-$1.56 per board foot (R-3.5/inch); closed-cell is $1.56-$3.48 per board foot (R-6.5/inch).
  • Area Size: A 500-square-foot garage might cost $1,000-$2,700; a 2,000-square-foot home could hit $4,000-$10,800.
  • Thickness: 2-6 inches is standard, with thicker layers boosting R-value and cost.
  • Labor: Florida’s foam insulation contractors Florida charge $0.50-$1.50 per square foot, about 30-50% of the total.
  • Prep: Wall injection or attic sealing adds $1-$3 per square foot if needed.

Use our spray foam cost calculator below for a quick estimate, or contact us for a custom report!

Spray foam insulation in existing walls cost

Installing spray foam insulation in existing walls costs $3,700 to $9,500 on average, depending on the project size. Installers spray slow-rising “injection foam” through holes drilled in the drywall or siding to fill the existing stud cavities.

  • Closed-cell injection foam adds strength to the walls.
  • Open-cell injection foam is better for sound dampening.

90% More Chances to Win Projects With Our Estimate!

Insulation Estimate

Attic spray foam insulation cost

Attic spray foam insulation costs $1,500 to $7,800+ on average for the floor, depending on the foam type and R-value. Attic insulation companies recommended open-cell foam in vented attics to fill floor nooks and crannies, but it may require a vapor barrier in cold climates.

LocationAverage cost installed
Attic floor$1,500 – $7,800
Attic rafters / roof deck$1,900 – $10,000

Cost to spray foam insulate a garage

Spray foam insulation enhances a garage’s energy efficiency by reducing heat loss and moisture buildup. Insulating a garage door costs between $300 and $500, while fully insulating all walls ranges from $2,900 to $9,800, depending on the garage size and foam type. Closed-cell spray foam is best for unfinished garage walls, offering superior insulation and moisture resistance. Open-cell foam, which is softer and more cost-effective, is ideal for finished walls. Proper insulation helps maintain comfortable temperatures, lowers energy bills, and prevents drafts, making it a worthwhile investment for attached or detached garages.

Spray Foam Insulation Cost Calculator

Beyond Residential: Commercial Insulation Insights

Spray foam isn’t just for homes. Consider:

  • Restaurants: A 5,000-square-foot Key West eatery might cost $10,000-$27,000 to insulate, keeping kitchens cool.
  • Warehouses: A 20,000-square-foot Orlando facility runs $24,000-$62,400, protecting goods from heat.
  • Hotels: A 100-room Daytona Beach hotel could hit $50,000-$135,000, ensuring guest comfort.

Our calculator scales to any project—try it out!

Insulation Cost Florida: Spray Foam vs. Alternatives

Not sure if spray foam is right? Here’s how insulation cost Florida stacks up in 2025:

  • Fiberglass Batts: $1.80-$3.60 per square foot. Affordable but less effective at air sealing.
  • Blown-In Cellulose: $0.96-$2.90 per square foot. Good for attics, weaker against moisture.
  • Spray Foam: $2.00-$5.40 per square foot. Top-tier insulation and air sealing, worth it for Florida’s humidity.

Spray foam’s higher upfront cost pays off with energy savings—especially in Florida’s heat. Ask us to compare options for your project!

Get 5 New Projects in the Next 7 Days With Our System

Real-World Examples: Spray Foam Across Florida

Our spray foam cost calculator scales from homes to commercial builds. Here’s how it applies to real projects:

A 2,000 sq ft Coffee Shop Build-Out in Sarasota

Opening a coffee shop in Sarasota? Insulating 2,000 square feet with open-cell foam (3 inches, R-10.5) costs $2,400-$3,120 ($1.20-$1.56/sq ft installed). Add closed-cell foam for exterior walls (2 inches, R-13) at $3,120-$6,960, and you’ve got a cozy, efficient space. Sarasota’s mild construction costs and small-business boom make this a smart investment—pair it with an asphalt driveway for $8.50-$18 per square foot.

A 10,000 sq ft Retail Strip Mall in Miami

For a 10,000-square-foot strip mall in Miami, closed-cell foam (3 inches, R-19.5) across walls and roof runs $30,000-$54,000 ($3.00-$5.40/sq ft). Miami’s high land prices and storm codes demand moisture-resistant insulation like closed-cell foam. Add parking lot sealing by foam insulation contractors Florida at $2-$5 per square foot, and you’re set for retail success.

A 50,000 sq ft Distribution Center in Jacksonville

A 50,000-square-foot warehouse in Jacksonville with open-cell foam (5 inches, R-17.5) for the roof costs $60,000-$78,000 ($1.20-$1.56/sq ft). Closed-cell foam for walls (2 inches, R-13) adds $75,000-$174,000. Jacksonville’s logistics appeal and lower land costs keep this affordable, with spray foam ensuring temperature control for goods.

Spray Foam Cost

Building Size:
x ft.
Spray Foam Type:
Insulation R-Value:
Number of Floors:
Roof Slope:
Insulate Attic/Roof:
Joist/Rafter Size:
Wall Stud Size:
Number of Windows:
Number of Doors:
US Region:
Low End
$0
Mid Range
$0
High End
$0
Question Answer

Frequently Asked Question

Anyone can use it! It’s designed for contractors looking to win more projects with accurate bids, as well as homeowners who want to get a sense of what insulation might cost for their home. Whether you’re a professional or a DIY enthusiast, it’s a handy starting point.

It’s simple—just input details about your project, like the area you’re insulating (in square feet) and any specific requirements you have. The calculator will then give you an estimated cost based on industry averages for spray foam insulation. For a more detailed quote, you can reach out to their team with your plans.

The calculator takes into account both open-cell and closed-cell spray foam insulation. Open-cell is typically cheaper and great for filling small gaps, while closed-cell is denser, offering better insulation and moisture resistance. The cost varies depending on which type you choose.

Costs can range widely depending on your project. On average, open-cell spray foam might run between $0.54 and $0.90 per board foot, while closed-cell could be $1.20 to $1.92 per board foot. For a full surface area, you’re looking at $2.00 to $5.50 per square foot installed, depending on factors like location and complexity.

Comprehensive Trade-Specific Estimates

At Estimate Florida Consulting, we offer detailed cost estimates across all major trades, ensuring no part of your project is overlooked. From the foundation to the finishing touches, our trade-specific estimates provide you with a complete and accurate breakdown of costs for any type of construction project.

Electrical Cost Estimator

Electrical

Asset 201
Plumbing Cost Estimator

Plumbing

Asset 191
Concrete Cost Estimator

Concrete

Asset 11
Masonry Cost Estimator

Masonry

Asset 301
Painting Cost Estimator

Painting

Asset 71
Drywall Cost Estimator

Drywall

Asset 271
HVAC Cost Estimator

HVAC

Asset 221
Metal Cost Estimator

Metal

Asset 291
Flooring Cost Estimator

Flooring

Roofing Cost Estimator

Roofing

Wood Work Estimate

Lumber

Asset 121
Construction Sitework Estimate

Sitework

Asset 321

Testimonials

What Our Clients Say

We take pride in delivering accurate, timely, and reliable estimates that help contractors and builders win more projects. Our clients consistently praise our attention to detail, fast turnaround times, and the positive impact our estimates have on their businesses.

Estimate Florida Consulting has helped us win more bids with their fast and accurate estimates. We trust them for every project!

Marvelous Marble
Marvelous Marble Manager

Their estimates are always on time and on point, making budgeting much easier. We've saved time and money thanks to their services.

6 Star Contractors
6 Star Painting Contractor

Since using their services, we’ve secured more projects. Their attention to detail is second to none.

Patio Pools Driveways
Patio Pools and Driveway Contractor

Steps to Follow

Our Simple Process to Get Your Estimate

01

Upload Plans

Submit your project plans, blueprints, or relevant documents through our online form or via email.

02

Receive Quotation

We’ll review your project details and send you a quote based on your scope and requirements.

03

Confirmation

Confirm the details and finalize any adjustments to ensure the estimate meets your project needs.

04

Get Estimate

Receive your detailed, trade-specific estimate within 1-2 business days, ready for your project execution.

Upload Plans Here