- Homepage
- Professional Siding Cost Estimate Florida
Professional Siding Cost Estimate Florida
Leading provider of estimate services.
Siding plays a major role in both the appearance and long-term protection of a Florida home or building. In a state known for heat, humidity, salt air, sudden storms, and hurricane seasons, selecting the right siding isn’t just a design choice — it’s a structural investment. Whether you’re a homeowner planning an upgrade, a contractor preparing a bid, a developer estimating project budgets, or a supplier evaluating demand, understanding siding costs in Florida is essential for accurate planning. With many siding materials available — from vinyl and wood to fiber cement, stucco, metal, brick, and stone — pricing can vary significantly depending on product selection, installation complexity, and the unique environmental conditions throughout Florida.
A professional siding cost estimate helps clarify the full financial picture before starting a project. It considers not only the price of materials but also labor requirements, home size, architectural design, accessibility, climate conditions, replacement vs. new installation, and Florida building code requirements. Costs also differ depending on whether the property is located inland, near the coast, or inside a high-velocity hurricane zone (HVHZ), where additional fastening and waterproofing requirements are mandatory.
Get a Quick
Siding Cost per Square Foot in Florida
The fastest way to begin estimating a siding project is by calculating cost per square foot. Florida pricing varies by material type, durability, installation time, and weather resistance. Premium materials that perform better in coastal climates or provide longer lifespans generally fall on the higher end, while budget-friendly materials are available at a more affordable price point.
Siding Material | Cost per Sq.Ft. Installed |
Vinyl Siding | $7.70 – $13.20 |
Fiber Cement | $9.90 – $15.40 |
Wood Siding | $11 – $22 |
Stucco | $10.45 – $20.90 |
Engineered Wood | $9.90 – $16.50 |
Metal Siding (Aluminum / Steel) | $12.10 – $24.20 |
Hardie Board | $11 – $23.10 |
Brick Siding | $9.90 – $18.70 |
Stone Veneer | $12.10 – $30.80 |
Solid Stone Siding | $22 – $55 |
These prices include material and installation. The wide range reflects Florida-specific installation standards, such as moisture barriers, hurricane fastening systems, and UV-resistant coatings that protect siding across coastal and inland regions.
Siding Cost by Home Size in Florida
While siding is priced per square foot, many homeowners and contractors prefer cost estimates based on total exterior square footage. Larger homes require more material and more labor time, and two-story properties typically cost more due to working height and safety equipment. The table below shows updated siding cost estimates for different exterior sizes commonly found across Florida.
Exterior Siding Area | Estimated Total Cost (Installed) |
800 sq.ft. | $6,160 – $22,000 |
1,000 sq.ft. | $7,700 – $27,500 |
1,200 sq.ft. | $9,240 – $33,000 |
1,500 sq.ft. | $11,550 – $44,000 |
2,000 sq.ft. | $15,400 – $60,500 |
2,500 sq.ft. | $19,250 – $77,000 |
3,000 sq.ft. | $23,100 – $99,000 |
The lower end of each price range applies to materials such as vinyl and engineered wood, while the higher end reflects premium siding options like stone, brick, and solid stone. Homes located in coastal or hurricane-exposed regions may also require additional weatherproofing layers and fastening components, which can shift the total cost upward.
Other factors that influence siding cost by home size include:
- Shape and architectural design of the home
- Whether installation requires ladders or scaffolding
- Condition of existing walls or sheathing
- Use of siding accents on gables, entryways, or columns
Because of Florida’s diverse housing styles — from coastal villas and modern builds to Mediterranean and ranch homes — siding cost can vary dramatically based on architectural complexity.
Get High-Quality 3D Rendering Services Today!
We Specialize in Both Residential and Commercial 3D Rendering Projects.
- Luxury Villas
- Apartment Complexes
- Modular Kitchens
- Bathrooms
- Office Buildings
- Shopping Malls
- Hospitals
- Hotels & Resorts
Siding Cost in Florida by Material — Complete Breakdown
Every siding material performs differently in Florida’s climate, and each requires a unique level of labor, waterproofing, and maintenance. The sections below provide a detailed and easy-to-understand cost breakdown for all siding types commonly installed across Florida homes and buildings.
Vinyl Siding Cost in Florida
Vinyl siding is one of the most economical choices and is available in many colors and textures. It resists moisture well but can fade gradually under Florida’s strong UV exposure.
Cost per sq.ft. installed | $7.70 – $13.20 |
Best for | Budget projects, traditional homes |
Lifespan | 20 – 40 years |
Fiber Cement Siding Cost in Florida
Fiber cement is engineered to stand up to Florida’s moisture, heat, and strong winds. It requires more labor because of its weight and cutting process, but it provides long-lasting value.
Cost per sq.ft. installed | $9.90 – $15.40 |
Best for | High-humidity and high-wind regions |
Lifespan | 30 – 50 years |
Wood Siding Cost in Florida
Wood siding offers a natural, warm look but requires more maintenance in Florida due to moisture and termite exposure. Frequent sealing or repainting is necessary.
Cost per sq.ft. installed | $11 – $22 |
Best for | Rustic and historic home designs |
Lifespan | 20 – 40 years with high maintenance |
Stucco Siding Cost in Florida
Stucco has remained one of Florida’s most popular choices for decades because of its heat resistance and Mediterranean architectural appeal.
Cost per sq.ft. installed | $10.45 – $20.90 |
Best for | Mediterranean, Spanish, and coastal homes |
Lifespan | 50 – 80 years |
Engineered Wood Siding Cost in Florida
Engineered wood offers the visual appearance of real wood but is more resistant to moisture and pests. It is easier to maintain than natural wood.
Cost per sq.ft. installed | $9.90 – $16.50 |
Best for | Modern and transitional home designs |
Lifespan | 25 – 40 years |
Metal Siding Cost in Florida (Aluminum / Steel)
Metal siding performs well in hot climates and is resistant to insects and fire. Aluminum handles salt air well when coated properly, while steel provides better impact resistance.
Cost per sq.ft. installed | $12.10 – $24.20 |
Best for | Contemporary, industrial, and coastal homes |
Lifespan | 40 – 70 years |
Hardie Board Siding Cost in Florida
Hardie Board is a premium fiber-cement siding designed specifically for tough climates. It is highly resistant to moisture, warping, pests, and corrosion.
Cost per sq.ft. installed | $11 – $23.10 |
Best for | Long-term durability and high-wind regions |
Lifespan | 30 – 50 years |
Brick Siding Cost in Florida
Brick siding is durable, timeless, and energy efficient. It requires very little maintenance once installed, but the installation process is labor-intensive.
Cost per sq.ft. installed | $9.90 – $18.70 |
Best for | Traditional homes and long-term property value |
Lifespan | 75 – 100+ years |
Stone Veneer Siding Cost in Florida
Stone veneer provides the upscale look of real stone without the extreme weight and cost of solid stone. It is popular for full-home exteriors and accent areas.
Cost per sq.ft. installed | $12.10 – $30.80 |
Best for | Luxury designs and feature walls |
Lifespan | 50 – 75+ years |
Solid Stone Siding Cost in Florida
Solid stone siding is one of the most premium exterior finishes. It is extremely durable but heavy, requiring structural strength and specialized labor.
Cost per sq.ft. installed | $22 – $55 |
Best for | High-end architectural and custom homes |
Lifespan | 100+ years |
Summary Table: Florida Siding Material Cost Comparison
Material Type | Cost per Sq.Ft. Installed | Lifespan |
Vinyl | $7.70 – $13.20 | 20–40 yrs |
Fiber Cement | $9.90 – $15.40 | 30–50 yrs |
Wood | $11 – $22 | 20–40 yrs |
Stucco | $10.45 – $20.90 | 50–80 yrs |
Engineered Wood | $9.90 – $16.50 | 25–40 yrs |
Metal | $12.10 – $24.20 | 40–70 yrs |
Hardie Board | $11 – $23.10 | 30–50 yrs |
Brick | $9.90 – $18.70 | 75–100+ yrs |
Stone Veneer | $12.10 – $30.80 | 50–75+ yrs |
Solid Stone | $22 – $55 | 100+ yrs |
90% More Chances to Win Bids with Our Estimate!
Labor Cost for Siding Installation in Florida — Full Breakdown
Labor has a major impact on the total cost of a siding project. Even when using the same material, labor pricing can vary depending on installation requirements, architectural complexity, fastening methods, and the experience level of the siding crew. Because siding functions as a protective barrier for Florida’s humid and storm-prone climate, correct installation is essential for long-term performance.
Why Labor Costs Vary in Florida
Labor pricing changes based on:
- Siding material weight and cutting difficulty
- Number of doors, windows, corners, and architectural features
- One-story vs. two-story homes
- Whether existing siding must be removed
- Wind-load and hurricane fastening requirements in specific counties
Materials like vinyl are quicker to install, while heavier materials such as brick, stone, Hardie Board, and fiber cement require more specialized skills.
Labor Cost by Siding Type in Florida
Siding Type | Labor Cost per Sq.Ft. Installed |
Vinyl | $2.75 – $6.05 |
Fiber Cement | $3.85 – $7.70 |
Wood | $4.40 – $8.80 |
Stucco | $4.95 – $11.00 |
Engineered Wood | $3.85 – $7.15 |
Metal (Aluminum / Steel) | $4.95 – $9.35 |
Hardie Board | $4.40 – $9.90 |
Brick | $6.05 – $11.55 |
Stone Veneer | $6.60 – $17.60 |
Solid Stone | $11 – $27.50 |
The difference between low and high labor rates is based on:
- Material handling time
- Required wall preparation
- Fastening and sealing system
For example, solid stone requires heavy lifting and precise leveling, while vinyl can be installed quickly with standard siding tools.
Labor Cost for New Siding vs. Replacement
If the project involves replacing old siding rather than installing new siding on a new home, labor costs increase due to removal and disposal.
Type of Project | Typical Labor Cost Increase |
New Siding Installation | No added cost |
Replacement — Lightweight Siding Removal (Vinyl, Engineered Wood) | $1,100 – $2,750 extra |
Replacement — Removal of Stucco, Brick, Stone, Fiber Cement | $3.30 – $7.70 per sq.ft. extra |
Homes with moisture problems, rotten sheathing, or termite damage may require repairs before siding can be installed, adding to the budget.
Replacement vs. New Installation — Cost Differences in Florida
Siding installation costs in Florida can vary significantly depending on whether you’re installing siding on a newly built home or replacing old siding on an existing structure. Replacement projects usually cost more because of extra labor, disposal fees, and potential wall repairs caused by moisture or age.
New Siding Installation (Lowest Cost Scenario)
New siding installation is typically more affordable because no demolition is involved. Installers work with clean wall sheathing and can apply moisture barriers, flashing, and siding without interruption.
Typical cost range | $7.70 – $55 per sq.ft. installed |
Best case for budget | New construction or full remodels with exposed sheathing |
Siding Replacement (Higher Cost Scenario)
Replacing existing siding requires removal, cleanup, and disposal — which adds to the overall budget. The cost depends on the type of material being removed and whether underlying surfaces are damaged.
Material Being Removed | Removal & Disposal Cost |
Vinyl / Engineered Wood | $1,100 – $2,750 total |
Metal | $1,650 – $3,850 total |
Stucco | $3.30 – $6.60 per sq.ft. |
Brick | $3.85 – $7.15 per sq.ft. |
Stone Veneer | $3.85 – $7.70 per sq.ft. |
Solid Stone | $4.40 – $8.80 per sq.ft. |
Replacement costs increase further if:
- The walls show signs of water damage
- Termites or rot are present
- Structural sheathing must be replaced
Additional waterproofing layers are required
When Replacement Becomes a Better Investment
Even though replacement costs more upfront, it can be the best long-term decision if:
- The existing siding no longer protects against moisture
- Energy bills are rising due to poor wall insulation
- Mold or rot is present behind siding
- The home requires new hurricane-resistant fastening
Florida’s climate makes moisture management critical. Removing worn or poorly sealed siding can prevent future structural damage.
Cost Estimator Table — 1,500 sq.ft. Florida Home (All Materials Compared)
To make budgeting easier, the table below shows the estimated cost to install siding on a 1,500 sq.ft. Florida home, including both materials and labor. These estimates reflect Florida-specific installation standards (moisture barriers, hurricane fastening, UV protection, and coastal weather resistance).
Siding Material | Estimated Cost for 1,500 sq.ft. Installed |
Vinyl Siding | $11,550 – $19,800 |
Fiber Cement | $14,850 – $23,100 |
Wood Siding | $16,500 – $33,000 |
Stucco | $15,675 – $31,350 |
Engineered Wood | $14,850 – $24,750 |
Metal Siding (Aluminum / Steel) | $18,150 – $36,300 |
Hardie Board | $16,500 – $34,650 |
Brick Siding | $14,850 – $28,050 |
Stone Veneer | $18,150 – $46,200 |
Solid Stone | $33,000 – $82,500 |
What causes the gap between low and high estimates?
A 1,500 sq.ft. siding project can shift upward or downward depending on:
- One vs. two-story property
- Coastal vs. inland location
- Removal of existing siding
- Architectural features requiring custom work
- Use of mixed siding (example: stone + fiber cement)
- Accent areas on porches, gables, or entryways
While vinyl and engineered wood offer the most budget-friendly pricing, materials like Hardie Board, fiber cement, and stucco provide long-term durability well suited for Florida’s climate. Stone, brick, and solid stone siding fall at the top of the price range due to labor and structural demands.
Get 5 New Projects in the Next 7 Days With Our System
Additional Cost Factors — Climate, Waterproofing, Trim, Fastening & Access Conditions
Beyond material and labor, several Florida-specific construction factors influence the final siding cost. These elements ensure durability against humidity, rain, hurricanes, and long-term sun exposure. While they add to the project budget, they also protect the property from future moisture damage and structural issues.
1. Climate-Driven Waterproofing Systems
Florida’s heavy rainfall and high humidity require reinforced moisture control layers behind siding. These protective layers raise the initial cost but extend siding life and reduce long-term repairs.
Waterproofing Component | Added Cost Range |
Weather-resistant barrier | $1,100 – $3,850 |
Flashing tape around openings | $550 – $1,320 |
Drip flashing for transitions | $385 – $990 |
Caulking & sealant upgrades | $275 – $1,210 |
2. Hurricane-Resistant Fastening
Many counties in Florida — especially coastal regions — require hurricane fastening schedules for exterior cladding.
Added fastening items may include:
- Reinforced screws or nails
- Additional fastening intervals
- Corner-bracing requirements
Typical cost added | $660 – $3,300 depending on home size & wind zone |
3. Trim, Soffits & Fascia Work
Siding projects often include upgrades to soffits, fascia boards, corner trims, and window/door trim profiles.
Trim Upgrade Level | Added Cost Range |
Basic trim replacement | $1,100 – $3,850 |
Decorative / premium trim | $2,750 – $8,250 |
Custom architectural trim | $5,500 – $13,200 |
4. Scaffolding & Elevated Access
Two-story homes or homes on raised foundations require additional labor and safety equipment.
Added access cost | $1,100 – $5,500 |
5. Insulation Upgrades Behind Siding
Adding insulation behind siding can dramatically increase comfort and reduce energy bills in Florida’s hot climate.
Cost range | $1,100 – $5,500 |
Benefit | Lower electric bills + improved indoor cooling |
6. Accent Siding & Mixed Material Designs
Many Florida homes combine siding materials for visual appeal — for example:
- Stucco + stone
- Hardie Board + brick accents
- Fiber cement + wood look panels
- Vinyl + stone veneer columns
Added cost | $2,200 – $13,200 depending on coverage area |
Enhancements & Home Improvement Costs with Siding Installation
Many homeowners take advantage of siding installation as an opportunity to update or improve additional exterior features. These enhancements not only improve curb appeal but may also boost durability, weather resistance, and long-term property value. Below are the most common exterior improvements completed during siding projects in Florida, along with updated cost estimates.
Stone or Brick Chimney Installation
Stone and brick chimneys add a high-end architectural look and long-term resilience. Labor is the main cost driver due to masonry skills and time.
Cost range | $4,400 – $8,800 |
Labor rate | $88 – $99 per linear foot |
Exterior House Painting
Some siding types — especially stucco, wood, and fiber cement — may be painted to refresh the home’s look or improve waterproofing.
Cost per sq.ft. | $2.64 – $5.50 |
Best practice | Clean surface thoroughly before painting |
Weatherproofing & Sealant Treatment
Most manufactured materials do not require sealing, but some natural stones benefit from waterproof treatment to protect against discoloration and salt air.
Cost per sq.ft. | $1.10 – $4.40 |
Ideal for | Limestone, marble & other porous stones |
Decorative Accent Siding
Accent siding is a popular design trend in Florida homes. It uses a second siding material to highlight areas like:
- Entryways
- Gables
- Columns
- Garage fronts
- Outdoor kitchens
Cost range | $2,200 – $12,650 |
Soffits, Fascia & Trim Upgrades
Replacing these components creates a cohesive and clean new look with the updated siding.
Cost range | $1,650 – $7,700 |
Energy-Efficient Insulation
Installing insulation behind siding dramatically improves cooling efficiency during Florida summers and reduces energy usage.
Cost range | $1,100 – $5,500 |
Maintenance & Annual Upkeep Costs — Siding in Florida
Florida’s warm, humid climate makes siding maintenance especially important. Even low-maintenance siding benefits from periodic cleaning and inspection to prevent long-term damage. While overall upkeep varies based on material type, location (coastal vs. inland), and sun exposure, the maintenance schedule below helps homeowners understand expected yearly care costs.
How Florida Climate Affects Siding Maintenance?
Siding in Florida is exposed to:
- High humidity
- Salt air in coastal regions
- Intense UV sunlight
- Frequent heavy rain
- Wind-driven debris during storms
Because of these conditions, cleaning and inspection once or twice a year are recommended to prevent mold, moisture buildup, or fading.
Annual Maintenance Cost by Siding Material (Florida)
Siding Material | Estimated Annual Maintenance Cost |
Vinyl | $110 – $385 |
Fiber Cement | $110 – $330 |
Wood | $440 – $1,320 |
Stucco | $165 – $495 |
Engineered Wood | $275 – $660 |
Metal (Aluminum / Steel) | $55 – $275 |
Hardie Board | $110 – $330 |
Brick | $55 – $220 |
Stone Veneer | $110 – $550 |
Solid Stone | $55 – $165 |
Wood requires the most care due to moisture and termites. Brick, metal, and solid stone require the least upkeep.
Recommended Maintenance Checklist
To prevent costly repairs later, the following simple upkeep steps go a long way in Florida:
✔ Rinse siding to remove salt, dust, and mildew
✔ Inspect caulking around trim and seams
✔ Check for loose panels or damaged fasteners after storms
✔ Keep landscaping off the siding to prevent moisture retention
✔ Repaint or reseal materials that require coating (wood, stucco, fiber cement)
Homes near the coast should rinse siding more frequently to reduce salt buildup — especially for metal, fiber cement, Hardie Board, and stone installations.
90% More Chances to Win Bids with Our Estimate!
Final Summary
Understanding siding costs in Florida is essential for accurate budgeting, whether planning a new build, remodeling project, or full siding replacement. Pricing varies based on the chosen siding material, labor complexity, installation conditions, climate-driven waterproofing requirements, and Florida building code compliance. Materials such as vinyl and engineered wood provide the most cost-friendly options, while fiber cement, Hardie Board, and stucco offer an excellent balance of strength and long-term value. Brick, stone veneer, and solid stone represent premium choices with higher installation costs but long-lasting architectural appeal.
Because Florida homes endure high humidity, heavy rainfall, salt air near the coast, and hurricane-season wind loads, siding does more than provide exterior style — it protects the structure of the home. For this reason, professional siding estimates include more than just material selection. They consider waterproofing barriers, trim systems, fastening schedules, architectural design features, and the condition of existing walls. Taking these factors into account reduces the risk of moisture damage and ensures the siding performs well for decades.
A clear cost estimate allows homeowners, contractors, developers, and suppliers to make informed decisions based on performance, maintenance expectations, and long-term investment. Whether the goal is durability, curb appeal, energy efficiency, or luxury styling, Florida offers siding options for every design and budget — and the right estimate helps determine the best match for each property.
Question Answer
Frequently Asked Question
Siding installation in Florida typically ranges from $7.70 to $55 per sq.ft. depending on the material, installation requirements, architectural design, and building codes.
Most 1,500 sq.ft. homes fall between $11,550 and $82,500, depending on the siding material and project complexity.
Brick, fiber cement, Hardie Board, and solid stone offer the longest durability in Florida’s climate when properly installed and maintained.
Vinyl siding is typically the most budget-friendly option. Engineered wood is also cost-effective while offering improved strength and durability.
Yes. Upgrading siding significantly enhances curb appeal and weather protection, and premium materials such as fiber cement, Hardie Board, stone veneer, and brick are known to boost property value.
Comprehensive Trade-Specific Estimates
At Estimate Florida Consulting, we offer detailed cost estimates across all major trades, ensuring no part of your project is overlooked. From the foundation to the finishing touches, our trade-specific estimates provide you with a complete and accurate breakdown of costs for any type of construction project.
Our Simple Process to Get Your Estimate
01
Upload Plans
Submit your project plans, blueprints, or relevant documents through our online form or via email.
02
Receive Quotation
We’ll review your project details and send you a quote based on your scope and requirements.
03
Confirmation
Confirm the details and finalize any adjustments to ensure the estimate meets your project needs.
04
Get Estimate
Receive your detailed, trade-specific estimate within 1-2 business days, ready for your project execution.
Client Trust Us
Our Clients & Partners
We pride ourselves on building strong, lasting relationships with our clients and partners across the construction industry.
Testimonials
What Our Clients Say?
We take pride in delivering accurate, timely, and reliable estimates that help contractors and builders win more projects. Our clients consistently praise our attention to detail, fast turnaround times, and the positive impact our estimates have on their businesses.
Estimate Florida Consulting has helped us win more bids with their fast and accurate estimates. We trust them for every project!
Marvelous Marble
