How Much Does It Cost To Build Dock?
When choosing a dock, homeowners have a wide range of options when choosing the shape, size, material, and configuration. Most homeowners fall more in the average range of $9,000 to $30,000. Most spend around $18,000 for a 360 sq.ft. stationary L wood dock with cedar deck. Docks vary widely in cost, with lower-end 120 sq.ft. floating dock with softwood deck running as low as $2,000. Large, cantilevered articulating docks cost as high as $70,000.
Dock Cost per Foot
The cost of your dock largely depends on the number of square feet being installed, but the average cost per square foot ranges from $20 to $50, averaging $40 per sq.ft. These costs include the cost of the dock materials and labor. In general, the longer it is, the more dock material will be used and the longer the labor will take. Additionally, the water may become deeper the farther the costs can extend, leading to added costs. Two primary types will be priced by square foot–piling and floating. Below you will see the average cost per square foot, ranging from $2,000 to $22,600.
Square Footage | Average Cost (Labor Included) |
---|---|
120 sq.ft. | $2,000 – $5,500 |
150 sq.ft. | $2,300 – $6,500 |
180 sq.ft. | $3,000 – $7,500 |
210 sq.ft. | $3,350 – $8,800 |
240 sq.ft. | $3,900 – $9,900 |
300 sq.ft. | $5,500 – $14,000 |
360 sq.ft. | $5,800 – $15,400 |
420 sq.ft. | $6,800 – $17,800 |
480 sq.ft. | $7,500 – $20,000 |
540 sq.ft. | $9,000 – $22,600 |
Visualize Your Deck Layout
Deck Planning Made Easy: Visualize Your Layout Instantly!
Dock Cost by Type
Many different types of docks are available in the market. Some remain in the water year-round, while others are only put in at the start of the season and taken out later. Some of them use a combination of stationary and temporary portions that let you increase the size of the dock as needed. The type that you choose depends on the function you intend for it, the area it is being installed, and the aesthetics you hope to achieve. Depending on the type you can expect to pay between $25 and $120 per square foot, including installation.
Type | Average Cost per Square Foot (Labor Included) |
---|---|
Floating | $25 – $50 |
Piling | $30 – $60 |
Pipe | $30 – $65 |
Wheel-In / Roll-In | $40 – $70 |
Crib | $40 – $60 |
Lift-Up | $40 – $60 |
Modular | $50 – $70 |
Suspension | $60 – $120 |
Floating Dock Cost
On average, the prices for a floating dock range between $125 and $50 per sq.ft., including the cost of installation. Costs vary depending on the material being used. Aluminum floating dock costs are significantly less than the cost of concrete ones. Floating docks are temporary and can be used on their own or affixed to another types.
Dock Piling Cost
The cost to install dock pilings runs between $30 and $60 per sq. ft. When most people think of docks, piling docks most likely come to mind. They are sometimes referred to as stationary docks and they include wooden decking affixed to wooden pilings, which will be driven deep into the sand of the body of water to secure them. This is a permanent option and remains in the water throughout the year.
Pipe Dock Cost
Pipe docks cost about the same as piling docks running between $30 to $65 per square foot, installed. They also have a similar appearance. They use pilings to secure them to the floor of the water. Where they differ is the form of piling and installation process. They use PVC pipes instead of wood filled with concrete. This makes them weighted and easier to install. Because of this, you may also hear these referred to as PVC docks.
Wheel-In Dock Cost
Wheel-in docks are relatively inexpensive, running between $40 and $70 per square foot installed. Wheel-in docks are constructed from aluminum with stainless steel screws to affix the legs. The design allows for adjustment from the top without getting into the water. The ease of adjustment makes it ideal for moving it up and down when water levels change. They are designed for all water depths, from super shallow areas to areas with high depths.
Dock Decking Cost by Material
The cost to install a dock depends largely on the type of decking you choose for the surface. Decking costs range from low-end wood options to more expensive but extremely durable options, such as concrete. On average, you can expect to pay $50 per sq. ft. for decking. When choosing which type of decking you want, consider how long you want it to last and the aesthetic appearance you desire. Below are some common boat deck prices based on the cost per square foot with labor included, ranging from $15 to $600.
Material | Cost per Sq.Ft. (Labor Included) |
---|---|
Pine | $15 – $50 |
Plastic | $25 – $80 |
Cedar | $30 – $80 |
Vinyl | $30 – $80 |
Pressure Treated | $30 – $90 |
Aluminum | $35 – $95 |
Hardwood | $40 – $100 |
Concrete | $220 – $600 |
Looking For Deck Builders?
Transform Your Outdoor Space: Get Professional Deck Builders Onboard!
Dock Replacement Cost
For a complete dock replacement, will be cost both the installation and removal costs. The project cost depends on the dock removal cost and how much of the frame or substructure needs to be replaced. Replacing the old decking runs $40 to $300 per sq.ft., depending on its size. In some cases, you may be able to replace the decking alone if there is damaged or rotted wood.
Other costs associated with replacement involve the other components related to the dock. If the floats on a floating dock need to be replaced, you can expect to pay between $250 and $300. Repairs to frames cost between $250 and $600. New bumpers could add between $10 and $40 per sq.ft. Replacing pilings and pipes can be one of the most costly expenses running $400 to $1,900 per piece.
If you want to completely remove your dock and reinstall a different dock style, you need to pay the removal cost of between $350 and $1,200, plus the cost of the new type chosen, which can average $17,000.
Configuration of Dock
The most common configuration for docks is to have the main portion extending straight out over the water, but this is not the only option for docks. In some cases, a narrow walkway can widen into a larger dock style, only to narrow again at the boat slip.
In other cases, if you have multiple boats, it may be beneficial to configure the dock project in an F, I, L, T, U, E, or H shape so that you can attach boat slips at various types of spaces. Other configurations may include a patio at one end or a Harbor-style dock with a walkway running parallel to the water and extending the arms outward. The key to determining the best configuration is to figure out how you intend to use it. Fishing, sunbathing, and entertaining may need a wider section, while a dock meant solely for accessing a single boat can be a narrow walkway.
F Shape Dock Cost
F docks are distinctive in their two parallel extensions coming off the main part of the dock, forming the F shape of the dock. This configuration is most often used when docking a small personal watercraft between the two parallel extensions, allowing access from either side. They can be ideal when there are two watercraft, one on each side of the parallel extensions.
L Shape Dock Cost
L docks are good for fishing, swimming, and sunbathing. They are a distinctive upside-down L shape, with one vertical piece and a horizontal decking piece, a horizontal piece that connects. The decking parallel to the shoreline creates ample space to set up chairs for fishing or for lounging while allowing you to enjoy the view of the water.
U Shape Dock Cost
The U dock is an excellent shape for homeowners with multiple types of boats. This unique shape gives individuals the opportunity to store up to three boats on their dock securely while allowing room for swimming. The middle of the U is most beneficial for smaller boats, such as fishing boats, kayaks, and canoes. The outsides of it are ideal for housing recreational boats while providing entry points into the water for swimming.
Looking For Deck Builders?
Transform Your Outdoor Space: Get Professional Deck Builders Onboard!
Double-Decker Boat Dock
You can expect to spend between $18,000 and $60,000 for a double-decker boat dock, with the average running around $40,000. A customized dock when you are looking to create a space to store your boat and for entertaining, a double-decker boat dock might be a good option. These docks feature the main dock, a water level that allows you to board and deboard a boat easily. An overhead deck is constructed above where the boat will dock, creating a living and entertainment space. The upper deck provides some basic protection for the boat when inclement weather occurs. Since they require extensive planning, design, and labor, they are significantly more expensive than other options. It is generally built in stages, starting with the bottom deck. Once the bottom’s structure is sound, the second level is built. And because of the scope of the project, a double-decker boat dock typically takes multiple days to complete. Double-decker boat docks vary greatly in project scale and size. The most popular materials are aluminum upper docks framed with galvanized steel frames, giving the structure stability and durability. Other common materials are synthetic wood, cedar, pine, and concrete.
Maintenance of Dock
The maintenance of the dock that your dock needs vary tremendously based on things like the climate of the place, type of water, type of docking material, and how much use it gets.
At a minimum, you should inspect the dock at the end of each season. Keep it clean, and make any necessary repairs to worn, cracked, or broken areas. If yours is moveable, removing it from the water at the end of each season helps extend its life. Docks with wood decking require regular annual maintenance to extend their life. This can include staining, oiling, and providing a protective water sealant. Warped or damaged boards should also be watched and replaced.
Deck vs Dock Cost
While docks and decks both include decking and can be linked to entertainment and recreation, their location and primary functions differ. Docks are placed along the water, starting at the shoreline and extending outward. They are used to make it easier to get into the water, as a place to fish, or to make it easier to get on and off various watercraft. While the average dock costs $8,000 to $27,000, a deck costs between $6,000 and $17,000 on average cost.
We Decks can be placed along the shoreline or extended into the water. They can be attached to your home to create an additional outdoor living or entertaining area. Decks range in design, size, and functions. Smaller versions may simply be used as a place to relax and get some sun, while others may be large enough to accommodate an entire outdoor living area.
Dock vs Pier Cost
The main difference between a dock and a pier is their work. Simply put, a dock acts more as a parking space while a pier functions more as a sidewalk. Piers are not designed to dock boats but as a transitional structure between water and land. Piers are often made of concrete or steel. Piers can often be constructed to allow homeowners to travel between the shore and a boat dock farther across the water. The cost to build a pier runs between $47,000 and $80,000. Below, you will see the cost comparison between a dock and a pier for outdoor living.
Visualize Your Deck Layout
Deck Planning Made Easy: Visualize Your Layout Instantly!
Boat Slip vs Dock Costs
There are many similarities between a boat slip and a dock. For certain types of docks, a boat slip acts as a single parking spot for your boat rather than a whole dock. Boat slips can be incredibly beneficial for smaller boats, such as fishing boats, small sailboats, and kayaks. Boat slips can either be part of an existing dock you are building or connected to larger docks in a marina. To simplify, a dock is a structure, while a boat slip is like the parking space for the boat. Boat slips range from 25’ to 50’ feet in length. In total, expect a boat slip to cost between $1,200 and $6,000. The cost of a dock runs from $8,000 to $27,000.
Cost To Build Dock on Lake
The cost to build a dock on a lake in Florida can vary significantly based on several factors, including the size of the dock, materials used, site conditions, design complexity, local regulations, and labor costs. Docks in Florida can serve various purposes, such as recreational use, boat access, fishing, or simply enjoying the waterfront view. Here’s a rough estimate of the cost to build a basic dock in Florida:
1. Size of the Dock: The size of the dock is a significant cost factor. A simple residential dock can be around 100-200 square feet, while larger docks or commercial ones can exceed 1,000 square feet.
2. Material Selection: The choice of materials for the dock plays a significant role in the cost. Common dock materials include wood, composite decking, concrete, or steel. Each material has its own cost per square foot.
3. Foundation and Piling: The type of foundation or piling required for the dock, which can depend on the lakebed conditions and water depth, will impact the overall cost.
4. Permitting and Regulations: Obtaining the necessary permits and ensuring compliance with local regulations may also add to the overall cost.
Based on these considerations, the cost to build a basic wooden dock in Florida can range from $50 to $150 per square foot. For example, a 200-square-foot wooden dock could cost between $10,000 and $30,000. However, keep in mind that larger or more complex docks with additional features can cost even more.
How much does a floating dock cost
The cost of a floating dock in Florida can vary depending on several factors, such as the size of the dock, materials used, design complexity, local labor rates, and any additional features or accessories.
Cost Factors | Cost Range (per sqft) (in USD) |
---|---|
Size of the Dock | $50 – $80 |
Material Selection | Variable (based on material) |
Floatation System | Variable (based on type) |
Anchoring System | Variable (based on type) |
Additional Features | Variable (based on features) |
For example, a 200-square-foot floating dock could cost:
Item | Estimated Cost (in USD) |
---|---|
Floating Dock (200 sqft) | $10,000 – $16,000 |
Material Selection | Variable (e.g., wood, aluminum, etc.) |
Floatation System | Variable (e.g., foam-filled floats) |
Anchoring System | Variable (e.g., helical anchors) |
Additional Features | Variable (e.g., handrails, ladders) |
Total Estimated Cost | Variable (depending on selections) |
Please note that the cost estimates provided above are rough approximations and can vary based on the specific materials chosen, design complexity, local labor rates, and other factors
Cost to install dock pilings in Florida
The cost to install dock pilings in Florida can vary depending on several factors, including the type of pilings, the number of pilings needed, the size of the dock, water depth, site accessibility, and local labor rates. Dock pilings serve as the foundational support for the dock, providing stability and ensuring it can withstand varying water levels and environmental conditions. Here’s an overview of the cost considerations for installing dock pilings in Florida:
Type of Pilings:
- Wood Pilings: Wood pilings are a common choice for residential docks in Florida. The cost of wood pilings can range from $100 to $300 per piling, depending on the length and diameter.
- Concrete Pilings: Concrete pilings are a more durable option and are used for larger and commercial-grade docks. The cost of concrete pilings can range from $300 to $800 per piling, depending on the size and design.
Number of Pilings:
- The number of pilings required will depend on the size and layout of the dock, as well as the site’s water conditions. More pilings may be needed for larger docks or areas with unstable soils.
Piling Installation Method:
- There are different methods of installing pilings, such as driving them into the lakebed or using helical anchors. The installation method can affect the overall cost.
Water Depth and Site Accessibility:
- If the water depth is considerable or the site is challenging to access, additional equipment and labor may be needed, which can increase the overall cost.
Permitting and Regulations:
- Obtaining the necessary permits and complying with local regulations for dock construction can add to the cost. Permit fees and engineering requirements should be considered.
Labor Costs:
- Labor costs for piling installation can vary based on the complexity of the project and local labor rates. More extensive or intricate installations may require additional skilled labor.
The cost to install dock pilings in Florida can range from $3,000 to $30,000 or more, depending on the factors mentioned above. For a basic residential dock with wood pilings, the cost may be on the lower end of the range. On the other hand, larger docks or those using concrete pilings for commercial use can be on the higher end.
Concrete Dock Cost
The cost of a concrete dock in Florida can vary depending on several factors, including the size of the dock, water depth, design complexity, site conditions, and local labor and material prices.
The size of the concrete dock is a significant cost factor. Larger docks will require more materials and labor, leading to higher costs.
The type of concrete used can impact the cost. Standard concrete or reinforced concrete with steel bars (rebar) for added strength may have different price points.
Cost Factors | Cost Range (per sqft) (in USD) |
---|---|
Size of the Dock | $150 – $300 |
Concrete Type | Variable |
Piling Foundation | $300 – $800 (per piling) |
Dock Accessories and Features | Variable |
Site Conditions | Variable |
Permitting and Engineering | Variable |
Please note that the values in the table are approximate and can vary based on specific materials chosen, design complexity, local labor rates, and other factors. The table serves as a general reference to understand the typical cost factors involved in building a concrete dock in Florida.
Process To Get Tree Dock Building Cost Estimate Report
Here I am going to share some steps to get your dock building cost estimate report.
You need to send your plan to us.
You can send us your plan on info@estimatorflorida.com
You receive a quote for your project.
Before starting your project, we send you a quote for your service. That quote will have detailed information about your project. Here you will get information about the size, difficulty, complexity and bid date when determining pricing.
Get Estimate Report
We do dock building cost estimating and prepare a detailed report for your project. At last you finalize the report and finish the project.