- Homepage
- Building Material Supplier Florida
Building Material Supplier Florida
We connect you with the best building material suppliers.
If you’re searching for a reliable building material supplier in Florida, Estimate Florida Consulting is here to make your job easier. Whether you’re constructing a new home, remodeling a commercial space, or handling a large development project, we connect you with verified suppliers across Florida for accurate pricing, dependable delivery, and high-quality materials.
We’re not a warehouse or a retail store. Instead, we’re your material sourcing partner — focused on getting you the right materials at the right cost from trusted Florida suppliers.
Why Choose a Florida-Based Building Material Sourcing Service?
Florida presents unique construction challenges — from hurricanes and high humidity to strict code compliance. Choosing the right building materials can protect your project from future repairs, failed inspections, or construction delays.
Estimate Florida Consulting helps you:
- Find materials that meet Florida building codes
- Get fast, accurate material takeoffs and quotes
- Compare costs across multiple suppliers
- Save time on chasing vendors and verifying inventory
We serve contractors, subcontractors, developers, and homeowners working across Florida.
Materials We Help You Source
We source materials for every phase of construction, including structural, finishing, exterior, and MEP systems. Below are key materials and estimated costs we help coordinate from Florida-based suppliers.
Concrete and Cement Products
Concrete quality directly affects foundation strength, floor slabs, and structural durability. We help you source concrete mixes based on PSI ratings and job-specific requirements.
- 3000 PSI Concrete: $130 – $145 per cubic yard
- 4000 PSI Concrete: $150 – $170 per cubic yard
- Fiber-Reinforced Concrete: Add $20 – $30 per yard
- Waterproof Mix Additives: $15 – $25 per yard
- Ready-Mix Delivery: Coordinated with pour schedule and access points
- Applications: Driveways, foundations, slabs, load-bearing walls
Looking For
Building Professionals For Your Project?
Concrete Blocks, Bricks, and Mortar
Masonry remains a key component in Florida construction for its resistance to moisture, wind, and pests.
- 8x8x16 Concrete Blocks (CMUs): $1.60 – $2.20 each
- Red Clay Bricks: $0.60 – $1.10 each
- Mortar Mix: $7 – $12 per 80 lb. bag
- Reinforced Bond Beams, Corner Blocks: Priced by project
- Applications: Exterior walls, structural partitions, fences
Lumber and Engineered Wood
Humidity, insects, and storms make it essential to use pressure-treated and code-compliant wood in Florida builds. We help you source all framing, sheathing, and engineered wood products.
- 2×4 SPF Framing Lumber (8’): $3.50 – $5.00
- 2×6 Pressure-Treated Lumber (10’): $9.00 – $13.00
- 7/16″ OSB Sheathing: $28 – $45 per sheet
- 3/4″ Subfloor Plywood: $45 – $70 per sheet
- LVL Beams: Varies by size and span
- Applications: Floor framing, roof framing, wall systems, load-bearing structures
Roofing Materials
Florida roofs must withstand high winds, intense UV rays, and frequent rain. We connect you with suppliers offering roofing materials built to handle the state’s weather conditions.
- Asphalt Shingles: $95 – $135 per square (100 sq. ft.)
- Metal Roofing (R-panel): $2.80 – $4.50 per sq. ft.
- Clay or Concrete Roof Tiles: $3.50 – $6.00 per sq. ft.
- Synthetic Roof Underlayment: $0.20 – $0.40 per sq. ft.
- Drip Edge, Flashing, Vents: Priced per linear foot or set
- Applications: Residential roofing, commercial roofs, flat and pitched systems
Steel and Reinforcing Materials
For reinforced concrete and structural framing, we help you source certified steel and rebar materials.
- Rebar (#3–#6): $0.80 – $1.15 per linear foot
- Rebar Mesh (5×150′ Roll): $90 – $140
- W-Beams, Channels, Plates: Based on size and length
- On-site Bending & Cutting Services: Available upon request
- Applications: Slabs, footings, beams, tilt-up walls
Call Us Now!
We Provide 3D Rendering Services!
For Building and Other Projects
Turnaround time is 1-2 days.
Win More Projects With Us
Drywall and Insulation Materials
Interior comfort and code compliance depend on proper drywall and insulation choices. We source boards and insulation suited for high-humidity areas like Florida.
- 1/2″ Standard Drywall: $11 – $15 per sheet
- 5/8″ Fire-Rated Drywall: $15 – $20 per sheet
- Moisture-Resistant Drywall (Greenboard): $14 – $18 per sheet
- Fiberglass Batts (R-13): $0.60 – $1.00 per sq. ft.
- Spray Foam (Closed-Cell): $0.90 – $1.50 per board foot
- Blown-in Cellulose: $0.75 – $1.10 per sq. ft.
Applications: Walls, ceilings, garages, moisture-prone spaces
Plumbing Materials
We help you source code-compliant plumbing materials that handle water pressure, resist corrosion, and meet energy standards.
- PEX Tubing (1/2”): $0.45 – $0.80 per foot
- Copper Pipe (3/4”): $3.00 – $4.50 per foot
- CPVC Pipe (3/4”): $0.90 – $1.20 per foot
- Water Heaters (Electric, 40-Gallon): $450 – $700
- Fittings, Valves, Drain Systems: Priced per unit
Applications: Residential and commercial plumbing systems, remodels, multi-family builds
Electrical Supplies
We source wiring, panels, conduit, and more — all matched to Florida codes for residential and commercial installations.
- Romex 12/2 NM Cable: $0.30 – $0.45 per foot
- EMT Conduit (10’): $4.50 – $6.00 per stick
- 100 Amp Panel: $90 – $150
- Circuit Breakers: $8 – $20 per unit
- Weatherproof Boxes and Fittings: Varies by model
Applications: New electrical service, upgrades, interior and exterior wiring
How the Process Works?
Our service is designed to make your job easier from the first call to final delivery:
- Send Us Your Material List or Plans
We take off quantities or work with your estimators. - We Connect with Local Suppliers
We check pricing, stock, lead times, and delivery availability across multiple vendors. - You Get a Complete, Clear Quote
We deliver a detailed material list with pricing and supplier info for your review. - We Help Coordinate Delivery
Once approved, we work with the suppliers to schedule deliveries based on your project timeline.
90% More Chances to Win Building Projects with Our Estimate
Request a Material Estimate Today
At Estimate Florida Consulting, we take the stress out of material sourcing. Whether you’re a general contractor working across multiple sites or a homeowner managing a renovation, we make sure you get the right materials, from the right source, at the right price.
If you’re searching for a building material supplier in Florida you can count on — we’re ready to help. Send us your plans or material list and we’ll handle the rest.
Let’s get your material quote started today.
Question Answer
Frequently Asked Question
Vinyl tile flooring installation for libraries typically takes 1 to 4 days, depending on the size of the area, subfloor conditions, and complexity of the design. At Estimate Florida Consulting, we streamline the process by coordinating contractors, permits, and inspections to minimize disruptions to daily library operations.
Yes, many vinyl tile products are manufactured using recyclable and low-VOC materials, making them a sustainable flooring option for Boynton Beach libraries. We help you source eco-friendly vinyl tiles from trusted suppliers and ensure compliance with local green building initiatives.
Vinyl tile flooring is easy to maintain. It only requires regular sweeping and occasional mopping with a neutral cleaner. Its non-porous surface resists stains and dirt, reducing cleaning time and costs—especially important in busy areas like study zones and children’s reading corners.
Yes, commercial-grade vinyl tiles are designed to handle heavy loads such as bookshelves, desks, and rolling carts. Their durable wear layers resist scuffs, scratches, and dents, making them a reliable choice for libraries with high-use furnishings.
Yes, vinyl tile flooring provides moderate sound absorption, helping to reduce footstep noise and maintain a quiet, distraction-free environment. For enhanced noise reduction, vinyl can be installed with acoustic underlayments in key areas like reading rooms and study zones.
Absolutely. Vinyl tile is water-resistant and moisture-proof, making it ideal for Boynton Beach’s humid climate. It protects against spills, humidity-related expansion, and mold or mildew, ensuring the flooring remains stable and clean.
Find the Best
