Batt & Roll Insulation Cost Estimator

Batt and roll insulation costs $0.90 to $2.80 per square foot installed or $1,400 to $4,300 total, depending on the R-value and project size. A roll of insulation costs $25 to $96 and covers 40 to 75 square feet. Labor costs $0.70 to $1.50 per square foot to install batt insulation.

Batt and roll insulation costs $0.90 to $2.80 per square foot installed, depending on the brand, material, and the required R-value of the insulated space.

Batt and Roll Insulation Cost Estimator

Get Estimate in Easy Steps

Frequently Asked Questions ( FAQs)

Batts are pre cut sheets of fiberglass insulation, and rolls are simply longer versions of batts. Both are designed to slide right into cavities between wood frames. They’re useful for controlling temperatures, acoustics, and lowering energy costs.

 

Upload Plan

Get a FREE estimate for your project 

The combination of ongoing shortages and increasing demands has led to higher fiberglass insulation prices. Over the past year, the global pandemic impacted the supply chain between China and North America, causing a shortage of many building products, including fiberglass insulation.
 

Upload Plan

Get a FREE estimate for your project 

The cost to insulate a 1,200 sq. ft. home averages $2,380 to $18,500. These costs are for the full range of options when insulating a home of this size.
 
 

Upload Plan

Get a FREE estimate for your project 

If the square footage of the room you’re planning on insulating is 1,000 square feet and you want to achieve an R-value of 60, you will need approximately 17 bags to fully insulate your room.
 
 

Upload Plan

Get a FREE estimate for your project 

Roll of insulation cost

A roll of insulation costs $25 to $96, depending on the brand, material, and R-value. A roll of insulation covers 40 to 75 square feet on average.

  • Roll insulation is ideal for larger areas like flooring for continuous coverage and reduced air gap potential.
  • Batts work best in framed spaces as they are pre-cut to standard wall, floor, and rafter cavities.
Batt and Roll Insulation Cost Estimator

Ecobatt insulation prices

Ecobatt insulation costs $0.60 to $1.40 per square foot for the material alone, depending on the R-value. Ecobatt insulation is sustainable fiberglass made from 30% recycled glass and free of formaldehyde and red list chemicals. Ecobatt is naturally brown but performs like traditional, pink fiberglass insulation.

Labor cost to install batt insulation

Insulation contractors charge $60 to $88 per hour or $0.60 to $1.50 per square foot to install batt insulation. Labor costs depend on local rates and the size and location of the area being insulated. A 2-person crew can typically install 1,000 SF of insulation in 4 to 5 hours.

Batt insulation cost factors

Factors that affect batt insulation cost include:

  • Size

    Bigger spaces require more insulation material and labor.

  • Accessibility

    Complex jobs like vaulted ceilings or hard-to-reach areas require more time and labor.

  • Additional supplies

    Additional supplies required for installation cost $30 to $55 on average for every 1,000 square feet of insulation.

  • Faced vs. unfaced

    Faced insulation is slightly more expensive and is typically used in first-time applications. Unfaced insulation is best when increasing the attic insulation or adding it between floors or interior walls for soundproofing.

  • Material

    Rockwool batt insulation costs 40% to 50% more than fiberglass.

  • Brand

    Batt insulation prices vary by manufacturer, including Owens Corning, CertainTeed, Johns Manville, and Knauf.

  • New construction vs. existing walls

    Insulating new construction is typically cheaper due to ease of access.

  • Removing old insulation

    Removing old insulation costs $1 to $3 per square foot.

  • A pest inspection costs $45 to $170 and is recommended before insulating an attic or crawl space. Pest extermination costs $135 to $200 per visit.

  • Asbestos removal costs $25 to $75 per square foot. Asbestos testing costs $300 to $850.

Choose Your Trade & Get a Sample Project

Residential Estimator

Residential Estimates

Commercial Estimating

Commercial Estimates

Industrial Estimate Service

Industrial Estimates

Mechanical Estimates

Concrete Estimates

Electrical Estimates

Electrical Estimates

Plumbing Cost Estimator

Plumbing Estimates

Floor Estimates

Masonry Estimates

Metal Estimates

Painting Estimates

Painting Estimates

Stucco Estimates

Stucco Estimates

Commercial Estimating

Roofing Estimates

Wood and Plastic Estimates

Wood & Plastic Estimates

HVAC Estimates

HVAC Estimates

Google Reviews

Patio Pools and Driveways
Patio Pools and Driveways
"Came to recuse and took care the project from start to finish"
I used their services for estimation. I am really impressed with their services. Thank you for your good service.
6 Star Constructors
6 Star Constructors
"Came to recuse and took care the project from start to finish"
I used their services for estimation. I am really impressed with their services. Thank you for your good service.
Marvelous Marble Restoration
Marvelous Marble Restoration
"Came to recuse and took care the project from start to finish"
I used their services for estimation. I am really impressed with their services. Thank you for your good service.
5/5
Google Review
More Reviews

Process To Get Batt & Roll Estimate Report

Here I am going to share some steps to get your batt & roll estimate report.

  • You need to send your plan to us.

    You can send us your plan on info@estimatorflorida.com

  • You receive a quote for your project.

    Before starting your project, we send you a quote for your service. That quote will have detailed information about your project. Here you will get information about the size, difficulty, complexity and bid date when determining pricing.

  • Get Estimate Report

    We do batt & roll estimating and prepare a detailed report for your project. At last you finalize the report and finish the project.

Contact Us