Asphalt Driveway Cost Calculator For Orlando, FL
Calculate Cost To Construct Asphalt Driveway
How Much Does an Asphalt Driveway Cost in Orlando?
Several factors, including size, depth, gradient, and finish, influence the total cost of a new driveway. Whether it’s a fresh installation or an overlay on an existing driveway also impacts expenses. On average, across the country, asphalt driveway installations cost around $5,690 in Orlando. However, totals can range from $5,050 to $10,900. Typically, homeowners in the state are paying between $9.00 and $20 per square foot, inclusive of labor costs. Understanding these variables helps homeowners gauge the overall expense of their driveway project and plan accordingly for the investment in enhancing their property.
Get a Quick
Estimate From Local Experts
How Much Does Asphalt Cost Per Ton in Orlando?
Asphalt costs approximately $125 to $245 per ton in Orlando. Each ton covers 36 and 96 square feet, depending on the driveway’s depth. The minimum recommended depth for a driveway is 2 inches, while homeowners often opt for depths of up to 6 inches for improved stability and durability. These costs, influenced by material expenses and depth requirements, are essential considerations for homeowners planning asphalt driveway installations in Orlando, ensuring they budget effectively for a durable and long-lasting addition to their property.
Depth | Coverage per Ton | 600 Sq. Ft. Driveway Cost | 1000 Sq. Ft. Driveway Cost |
2 inches | 80 sq. ft. | $900 – $1,800 | $1,500 – $3,000 |
3 inches | 60 sq. ft. | $1,200 – $2,400 | $2,000 – $4,000 |
4 inches | 40 sq. ft. | $1,800 – $3,600 | $3,000 – $6,000 |
5 inches | 32 sq. ft. | $2,250 – $4,500 | $3,750 – $7,500 |
6 inches | 30 sq. ft. | $2,400 – $4,800 | $4,000 – $8,000 |
Step-by-Step Guide to Calculating Asphalt Driveway Costs
Measure Your Driveway
Begin by measuring the length and width of your driveway to determine the total square footage. Multiply the length by the width to get the area in square feet. This measurement will serve as the basis for estimating material and labor costs.
Choose the Type of Asphalt
Select the type of asphalt for your driveway based on factors such as durability, aesthetics, and budget. Options include traditional hot mix asphalt (HMA), warm mix asphalt (WMA), or porous asphalt. Each type has different characteristics and cost implications, so research thoroughly before making a decision.
Assess Preparation Needs
Evaluate the condition of your driveway and assess any preparation work required before asphalt installation. This may include removing existing pavement, grading the surface for proper drainage, repairing cracks or potholes, and applying a suitable base material. The extent of preparation work will impact overall project costs.
Consider Additional Features
Determine if you want to incorporate any additional features into your asphalt driveway, such as edging, borders, or decorative elements. These features can enhance the appearance and functionality of your driveway but may add to the overall cost. Factor in the cost of materials and labor for these enhancements.
Get Labor Estimates
Obtain estimates from reputable asphalt contractors for the labor portion of the project. Labor costs vary depending on factors such as the complexity of the job, local labor rates, and the experience level of the contractor. Request quotes from multiple contractors to compare prices and services offered.
Use the Asphalt Driveway Cost Calculator
Utilize an asphalt driveway cost calculator to estimate the total project cost based on the measurements, chosen asphalt type, preparation needs, additional features, and labor estimates. These online calculators provide an accurate breakdown of material and labor costs, helping you budget effectively for your driveway project.
Asphalt Driveway Cost Breakdown in Orlando
When planning for an asphalt driveway installation in Orlando, it’s crucial to understand the breakdown of expenses. Typically, costs can be divided into three main components: excavation and grading, materials, and paving. Here’s a detailed overview of where your expenses will be allocated:
Excavation and Grading Costs
Preparing the land for your asphalt driveway involves excavation and grading to ensure proper leveling and drainage. Excavation costs in Orlando typically range from $2,160 to $7,344. Grading and leveling the land incur additional expenses, averaging between $7.20 to $14.40 per square foot.
For driveways with steeper gradients, expect higher costs due to the additional work required to ensure safety and stability.
Material Costs
The choice of asphalt material significantly impacts the overall project cost. Costs for materials such as recycled or reclaimed asphalt, standard asphalt, and porous asphalt will vary accordingly. Opting for stamped or colored blacktop will result in higher material expenses, with the 20% markup considered in the estimate. It’s essential to consider your project’s specific requirements and budget when selecting the asphalt type to ensure cost-effectiveness without compromising quality.
Paving Costs
Labor constitutes a significant portion of the paving costs, typically ranging between $7.20 and $10.08 per square foot. For instance, for an average-sized driveway of 600 square feet, labor costs would amount to approximately $4,320 to $6,048. Additional factors that may affect labor costs include the removal of an existing driveway and the extent of leveling and grading required for a new driveway. Projects involving extensive groundwork or specialized tasks may incur higher labor expenses. Consulting with experienced contractors can provide insights into labor requirements and associated costs tailored to your specific project needs.
Hire Asphalt Driveway Contractors
- School & University Building
- High-Rise Building
- Shopping Complex
- Data Center Building
- Multi-Family Building
- Hotel Building
- Hospital Building
- Warehouse Building
New Asphalt Driveway Cost
For a new asphalt driveway in Orlando, the cost typically ranges from $8.40 to $15.60 per square foot, including installation. This estimate encompasses material costs ranging from $2.40 to $7.20 per square foot and labor costs ranging from $6 to $8.40 per square foot. While opting for reclaimed asphalt may offer some savings on materials, it’s essential to ensure the quality and durability of the recycled material.
Choosing porous asphalt for a new driveway in Orlando will incur material costs ranging from $3.60 to $9.60 per square foot, along with an additional $0.60 to $1.20 per square foot for extra crushed stone, in addition to labor expenses. Porous asphalt is beneficial for enhancing drainage and reducing runoff, making it a suitable option for regions prone to heavy rainfall or flooding.
Replacement Asphalt Driveway Cost
The cost to replace an asphalt driveway in Orlando averages between $9.60 and $18 per square foot. This includes expenses such as $1.20 to $2.40 per square foot for the removal of the existing surface, $2.40 to $7.20 per square foot for materials, and $6 to $8.40 per square foot for labor. Proper removal of the old surface is essential to ensure a stable foundation for the new asphalt layer and prevent issues such as uneven settling or cracking.
Asphalt Overlay Cost
An asphalt overlay, or top coat, typically costs $4.20 to $8.40 per square foot. This option is less expensive as it requires fewer materials and less labor compared to a full replacement. However, it’s essential to note that overlays are not suitable for severely damaged driveways with extensive holes and cracks. Consulting with an experienced contractor can help determine if an overlay is a viable solution based on the condition of the existing driveway.
Cost to Install Asphalt Over Concrete Driveway
Overlaying asphalt onto a concrete driveway in Orlando costs $4.20 to $8.40 per square foot, similar to overlaying old asphalt. While this option may offer a budget-friendly solution, it’s important to recognize that it may not have the same longevity as a new concrete or asphalt driveway. Regular inspection and maintenance are necessary to address any cracks that may appear due to concrete expansion and contraction, ensuring the longevity and durability of the asphalt top coat.
Cost of Different Types of Asphalt in Orlando
When considering asphalt for your driveway in Orlando, it’s essential to understand the cost implications associated with various types of asphalt materials. You can make informed decisions based on your budget and preferences while enhancing the curb appeal and functionality of your property.
Asphalt Type | Cost Range per Square Foot (USD) |
Recycled/Reclaimed | $7.44 – $10.50 |
Standard | $8.40 – $15.60 |
Porous | $3.60 – $9.60 |
Stamped/Colored | $12 – $20.40 |
Heated Blacktop | $14.40 – $30 |
Recycled or Reclaimed Asphalt Cost Per Square Foot
Opting for a recycled asphalt driveway in Orlando typically costs between $7.44 and $10.50 per square foot, including installation. Recycled asphalt offers an eco-friendly and cost-effective alternative to new asphalt, with material expenses averaging $12 to $24 per ton or $0.24 to $0.90 per square foot. Labor costs range from $6 to $8.40 per square foot. Utilizing reclaimed asphalt from an existing driveway may incur slightly higher labor costs but can result in significant savings on material transportation and loading expenses.
Standard Asphalt Cost Per Square Foot
For a standard asphalt driveway installation in Orlando, expect to pay between $8.40 and $15.60 per square foot. This estimate covers material costs ranging from $6 to $8.40 per square foot and labor costs ranging from $2.40 to $7.20 per square foot. Additionally, the cost of the hardcore or gravel layer beneath the asphalt, crucial for stabilizing the driveway, adds an extra $0.60 to $1.20 per square foot.
Porous Asphalt Costs Per Square Foot
Porous asphalt, designed to promote efficient water drainage, costs between $3.60 and $9.60 per square foot in Orlando. This type of asphalt minimizes runoff, reducing the need for extensive leveling and grading. However, an additional layer of crushed stone beneath the blacktop, costing $0.60 to $1.20 per square foot, is necessary to facilitate better drainage and enhance the pavement’s longevity.
Stamped or Colored Asphalt Cost Per Square Foot
For a custom look and enhanced curb appeal, stamped or colored asphalt driveways in Orlando cost between $12 and $20.40 per square foot, including installation. Material expenses range from $2.40 to $7.20 per square foot, while labor costs range from $9.60 to $13.20 per square foot. With an average-sized driveway of 600 square feet, total costs typically range from $7,200 to $12,240.
Heated Blacktop Cost Per Square Foot
Investing in a heated blacktop driveway in Orlando entails material costs of $14.40 to $30 per square foot, covering both the asphalt and the heating system installed below the surface. Asphalt expenses range from $8.40 to $15.60 per square foot, while heating system costs range from $6 to $14.40 per square foot. For a standard 600-square-foot driveway, total costs range from $8,640 to $18,000, inclusive of the heating system installation.
Download Template For Asphalt Driveway Project Breakdown
- Materials list updated to the zip code
- Fast delivery
- Data base of general contractors and sub-contractors
- Local estimators
Conclusion
When considering the installation of an asphalt driveway in Orlando, it’s vital to grasp the numerous factors that influence the overall cost. The price can range significantly based on dimensions, depth, gradient, chosen finish, and whether it’s a fresh installation or an overlay on an existing driveway. On average, homeowners in Orlando are investing approximately $5,688 for asphalt driveway installations, with costs ranging from $5,040 to $10,800. The cost breakdown includes expenses for materials, labor, and additional features like stamped or colored asphalt. By understanding these variables and utilizing resources such as the Asphalt Driveway Cost Calculator, homeowners can effectively plan and budget for a durable and visually appealing addition to their property.
FAQs
The cost of an asphalt driveway depends on various factors such as size, depth, gradient, and finish. On average, asphalt driveway installations in Orlando range from $5,045 to $10,900, with homeowners typically paying between $9.00 and $20 per square foot, inclusive of labor costs.
Asphalt costs approximately $120 to $245 per ton in Orlando. The coverage per ton varies from 36 to 96 square feet, depending on the driveway’s depth. Costs are influenced by material expenses and depth requirements, essential considerations for budgeting effectively.
To calculate the cost of an asphalt driveway, measure the area, determine the asphalt thickness, calculate material volume, check material costs, include base material, estimate labor costs, add equipment expenses, and sum all these costs.
One ton of asphalt typically covers about 80 square feet at a thickness of 2 inches. Coverage can vary based on the specific thickness and asphalt mix used, so it’s important to consult with a supplier for accurate estimates.
One ton of asphalt typically covers about 80 square feet at a thickness of 2 inches. Coverage can vary based on the thickness and specific asphalt mix, so consult with a supplier for accurate estimates.
Google Reviews
Process To Get Asphalt Driveway Cost Estimate Report
Here I am going to share some steps to get asphalt driveway cost estimate report.
