Asphalt Driveway Construction Cost Estimator

Leading provider of asphalt driveway estimating.

Asphalt paving costs $5 to $9 per square foot installed. Paving a new asphalt driveway costs $1,400 to $4,200 on average. The cost to pave a private asphalt road is $40 to $90 per linear foot. Asphalt parking lot paving costs $5 to $9 per square foot. An asphalt sidewalk costs $14 to $30 per linear foot.

National Average Cost$2,500
Minimum Cost$650
Maximum Cost$6,200
Average Range$1,400 to $4,200
Asphalt Driveway Construction Cost Estimator

Hire Asphalt Driveway Contractor for Your Project

Frequently Asked Questions ( FAQs)

Strong blacktop driveways are typically built using crushed angular gravel as a base. This gravel needs to be a minimum of 6 inches thick for light vehicle traffic such as cars and pickup trucks.
Call Now: (561)530-2845

Upload Plan

Get a FREE estimate for your project 

A 4-inch thickness may be adequate, but 5 or even 6 inches of full-depth asphalt will assure you of a stronger, stable driveway under a wider range of climate and loads. As an option, some contractors use 6 to 8 inches of compacted aggregate, or gravel, as a base under 3 inches of asphalt pavement.

Call Now: (561)530-2845

Get a FREE estimate for your project

Upload Plan

The best temperature for paving asphalt is about 70 degrees Fahrenheit. For most people, that would make the late spring or early summer the best time of year for a new driveway, but that will vary depending on where you live.

Call Now: (561)530-2845

Get a FREE estimate for your Commercial Building project 

Upload Plan

Generally speaking, late spring until early fall is the best time to pave a new asphalt driveway. This may vary depending on the region you live in. It’s best to work with asphalt when air and surface temperatures are 50°F and above. Moreover, firm ground is best for paving with asphalt.

Call Now: (561)530-2845

Get a FREE estimate for your Commercial Building project 

Upload Plan

Why Choose Our Asphalt Driveway Cost Estimator?

Florida’s unique environment—humid summers, frequent storms, and sandy soils—demands more than generic estimates. At Estimate Florida Consulting, we specialize in driveway paving Florida projects, delivering accurate costs that reflect regional realities. Here’s why we’re your trusted partner:

  • Florida-Specific Precision: We use 2025 market data, like asphalt at $130-$260 per ton, to ensure your estimate holds up.
  • Tailored to Your Needs: From a small asphalt drive to a massive industrial complex, we customize every quote.
  • Quick Turnaround: Share your plans, and we’ll provide a detailed report fast—perfect for those seeking paving estimates near me.
  • All Project Sizes: Whether it’s a home driveway or a 50,000-square-foot warehouse, we’ve got the expertise.

Asphalt Driveway Cost in Florida (2025 Updates)

Costs in 2025 range from $8.50 to $18 per square foot, including installation by asphalt contractors Florida. For a standard 600-square-foot two-car driveway, expect $5,100 to $10,800—a slight rise from past years due to increased material and labor prices. Here’s what shapes the cost:

  • Size: A 200-square-foot single-car drive runs $1,700-$3,600; an 800-square-foot double-car hits $6,800-$14,400.
  • Materials: Hot-mix asphalt costs $130-$260 per ton (covering 36-96 square feet at 2-6 inches deep), a staple for durability.
  • Site Prep: Grading and excavation average $2-$5 per square foot, more if drainage or tree removal is needed.
  • Labor: Florida crews charge $5-$8 per square foot, roughly half the total.
  • Extras: Stamped asphalt or permeable options for rain management add $3-$10 per square foot.

Asphalt paving cost per square foot

Asphalt paving costs $5 to $9 per square foot on average. Asphalt materials and installation labor costs $4 to $6 per square foot, plus basic excavating and installing a gravel subgrade costs $2 to $4 per square foot. Adding colors, patterns, curbs, or sidewalks cost extra.
ASPHALT PAVING COST PER SQUARE FOOT
FactorCost per square foot
Gravel subgrade installation$2 – $4
Asphalt materials and installation$4 – $6
Total cost$5 – $9

90% More Chances to Win Projects With Our Estimate!

Asphalt Paving Cost Estimator

Asphalt paving requirements:

  • Sub-surface layer of compacted gravel for drainage and support. A thicker gravel driveway base layer between the soil and the asphalt increases lifespan.

  • Binder course (basecoat) asphalt layer with coarse stones.

  • Finish course (topcoat) asphalt layer with ground stones, tack-coat adhesive, and sealer.

Cost to pave an asphalt road

Paving an asphalt road involves several cost factors, including road width, thickness, base preparation, and location. A private one-lane asphalt road costs $40 to $90 per linear foot, while a two-lane (24-foot-wide) road ranges from $75 to $180 per linear foot or $388,000 to $920,000 per mile. Roads require a thicker asphalt layer, typically 5 to 11 inches, for durability under heavy traffic. Additional costs may include grading, drainage systems, and culverts. High-traffic areas or roads built on unstable soil may also require a reinforced base, increasing overall construction expenses. Regular maintenance, like sealing and resurfacing, extends longevity.

Asphalt Driveway Construction Cost Estimator

Asphalt Road Paving Cost

LengthSquare footageAverage cost
100 Feet (one-lane)1,200$3,700 – $8,700
500 Feet (one-lane)6,000$17,700 – $42,700
1,000 Feet (one-lane)12,000$35,500 – $85,700
1 Mile (two-lane)126,720$388,000 – $920,000

90% More Changes to Win Asphalt Paving Project Bids With Our Estimate

Take the First Step to Your New Paver Bid Win – Just Upload Plans!

Asphalt sidewalk or walkway cost

An average 48″-wide asphalt walkway or sidewalk costs $14 to $30 per linear foot. Installing a paved 50-foot asphalt sidewalk costs $620 to $1,600. Sidewalk construction requires a permit costing $45 to $75 that’s pulled by the contractor.

Asphalt path cost

Paving a 100-foot asphalt path costs $950 to $2,200 on average or $9.5 to $22 per linear foot. Garden paths are typically 30 to 36 inches wide and don’t require a gravel base. Hard-to-access and curved paths with complicated designs cost more because of the additional labor.

Cost to repave driveway

The average cost to repave an asphalt driveway is $6 to $12 per square foot with a new gravel base or $5 to $9 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,800 to $4,200 on average. Repaving includes removing and hauling away the existing asphalt.

Cost to lay asphalt over concrete driveway

Laying asphalt over a concrete driveway costs $1 to $3 per square foot, making it a cost-effective alternative to full concrete replacement. Contractors first clean the surface and fill cracks with concrete-repair caulk to prevent future issues. Since concrete lacks the flexibility of asphalt, expansion joints can cause reflective cracking over time. To prevent this, a bonding layer or fabric is often added for stability. Proper drainage is also essential to avoid water damage. While resurfacing is cheaper than new concrete, a well-prepared base ensures long-term durability, reducing the need for frequent repairs.

Asphalt Driveway Construction Cost Estimator
  • Installers cut out and patch potholes first with stabilized base asphalt.

  • Contractors spread self-adhesive fabric over the expansion joints.

  • The entire concrete surface gets a layer of geotextile paving fabric to secure it.

  • Contractors spread 3 to 4 inches of hot-mix asphalt and compact it.

Asphalt Driveway Cost in Florida

Looking for an asphalt driveway near me in Florida? Costs in 2025 range from $8.50 to $18 per square foot, including installation by asphalt contractors Florida. For a standard 600-square-foot two-car driveway, expect $5,100 to $10,800—a slight rise from past years due to increased material and labor prices. Here’s what shapes the cost:

  • Size: A 200-square-foot single-car drive runs $1,700-$3,600; an 800-square-foot double-car hits $6,800-$14,400.

  • Materials: Hot-mix asphalt costs $130-$260 per ton (covering 36-96 square feet at 2-6 inches deep), a staple for durability.

  • Site Prep: Grading and excavation average $2-$5 per square foot, more if drainage or tree removal is needed.

  • Labor: Florida crews charge $5-$8 per square foot, roughly half the total.

  • Extras: Stamped asphalt or permeable options for rain management add $3-$10 per square foot.

Need a quote? Use our estimator below or contact us for a custom breakdown!

What’s Included in Your Asphalt Driveway Estimate?

Our estimates cover the full process:

  • Site Prep: Clearing, grading, and a 4-8-inch gravel base for stability and drainage.

  • Asphalt Layers: Binder and topcoat, typically 2-6 inches total, applied by skilled asphalt contractors Florida.

  • Labor: Professional installation suited to Florida’s conditions.

  • Finishing: Compaction and cleanup for a smooth, lasting result.

Add-ons like permeable asphalt for rain or decorative stamping? We’ll factor those in too.

Asphalt Driveway Construction Cost Estimator

Why Asphalt for Florida Driveways?

Asphalt is a favorite for driveway paving Florida because it’s:

  • Affordable: $8.50-$18 per square foot beats concrete’s $9-$22.

  • Fast: Installed in 2-3 days, ready in a week.

  • Durable: Lasts 15-30 years with sealing every 3-5 years to fight UV and rain.

  • Flexible: Adapts to sandy soils better than rigid concrete.

Get 5 New Projects in the Next 7 Days With Our System

Asphalt Driveway Maintenance Tips

Extend your driveway’s life with these tips:

  • Sealcoating: Every 3-5 years ($0.20-$0.50 per square foot) protects against sun and rain.

  • Crack Filling: Quick fixes ($1-$3 per linear foot) prevent bigger damage.

  • Cleaning: Regular sweeping and pressure washing keep it sharp.

Local asphalt contractors Florida can handle upkeep—ask us for recommendations!

Why Choose Our Asphalt Driveway Cost Estimator?

Florida’s unique environment—humid summers, frequent storms, and sandy soils—demands more than generic estimates. At Estimate Florida Consulting, we specialize in driveway paving Florida projects, delivering accurate costs that reflect regional realities. Here’s why we’re your trusted partner:

  • Florida-Specific Precision: We use 2025 market data, like asphalt at $130-$260 per ton, to ensure your estimate holds up.

  • Tailored to Your Needs: From a small asphalt drive to a massive industrial complex, we customize every quote.

  • Quick Turnaround: Share your plans, and we’ll provide a detailed report fast—perfect for those seeking paving estimates near me.

  • All Project Sizes: Whether it’s a home driveway or a 50,000-square-foot warehouse, we’ve got the expertise.

Calculate Cost To Construct Asphalt Driveway

0
0
0
0
0
0
0
0
0
0

0

Please fill out all fields to calculate!
Adders
0
0
0
0
Estimated Construction Cost
Total Cost: 0
Per Square Foot: 0

Estimated cost

Please fill out all fields above!

Comprehensive Trade-Specific Estimates

At Estimate Florida Consulting, we offer detailed cost estimates across all major trades, ensuring no part of your project is overlooked. From the foundation to the finishing touches, our trade-specific estimates provide you with a complete and accurate breakdown of costs for any type of construction project.

Electrical Cost Estimator

Electrical

Asset 201
Plumbing Cost Estimator

Plumbing

Asset 191
Concrete Cost Estimator

Concrete

Asset 11
Masonry Cost Estimator

Masonry

Asset 301
Painting Cost Estimator

Painting

Asset 71
Drywall Cost Estimator

Drywall

Asset 271
HVAC Cost Estimator

HVAC

Asset 221
Metal Cost Estimator

Metal

Asset 291
Flooring Cost Estimator

Flooring

Roofing Cost Estimator

Roofing

Wood Work Estimate

Lumber

Asset 121
Construction Sitework Estimate

Sitework

Asset 321

Google Reviews

Patio Pools and Driveways
Patio Pools and Driveways
"Came to recuse and took care the project from start to finish"
I used their services for estimation. I am really impressed with their services. Thank you for your good service.
6 Star Constructors
6 Star Constructors
"Came to recuse and took care the project from start to finish"
I used their services for estimation. I am really impressed with their services. Thank you for your good service.
Marvelous Marble Restoration
Marvelous Marble Restoration
"Came to recuse and took care the project from start to finish"
I used their services for estimation. I am really impressed with their services. Thank you for your good service.
5/5

Steps to Follow

Our Simple Process to Get Your Estimate

01

Upload Plans

Submit your project plans, blueprints, or relevant documents through our online form or via email.

02

Receive Quotation

We’ll review your project details and send you a quote based on your scope and requirements.

03

Confirmation

Confirm the details and finalize any adjustments to ensure the estimate meets your project needs.

04

Get Estimate

Receive your detailed, trade-specific estimate within 1-2 business days, ready for your project execution.

Upload Plans Here