Multi Family Building Drywall & Insulation Cost Estimator

If you’re a painting contractor, estimating the cost of a painting project accurately is crucial to winning jobs and ensuring profitability. However, estimating can be a time-consuming and challenging process, especially if you’re trying to do it all on your own. That’s where a professional painting estimating service comes in. Our painting estimating service for contractors is a professional service that provides detailed estimates for painting projects. These estimates take into account factors such as the size of the project, the type of paint, the condition of the existing paint, and any other relevant factors that can impact the cost of the project.

The size of the project is one of the most significant factors that affect the cost of drywall installation. Larger projects will require more drywall sheets and more labor, driving up the cost of the installation.

Multi-Family Building Drywall & Insulation Cost Estimator

We help Residential & Commercial Contractors to win more projects with higher accuracy.

Drywall Cost per Square Foot

Drywall¹ has a cost range of installation costs, depending mostly on the type and job size. Most installers charge less per square foot for entire house sheetrock¹ installations than for small installations. The cost of the material and installation averages $3.50 to $8.50 a sq.ft. for most jobs, but you can use more costly materials that increase the project cost. Some projects may have lower costs if it is not finished, such as in some garages or basements. Below is the average cost to install it in several wall and room sizes to estimate drywall project cost.

Square Feet	Average Cost (Materials Only)	Average Cost (Installed)
50 sq.ft.	$27 – $39.50	$77 – $179
100 sq.ft.	$55 – $85	$170 – $380
200 sq.ft.	$130 – $180	$350 – $800
500 sq.ft.	$280 – $390	$780 – $1,850
1,000 sq.ft.	$550 – $850	$1,600 – $3,900
2,000 sq.ft.	$1,300 – $1,800	$3,500 – $8,000

Multi Family Building Drywall Takeoffs

Multi-family building construction projects require precise estimates of materials and labor to be completed on time and within budget. As a drywall and insulation takeoff service provider, my goal is to ensure that the project team has an accurate estimate of the materials required for the project. The size and layout of the building are essential factors to consider when providing takeoff services. It’s crucial to have accurate measurements of the floor area, ceiling height, and wall space to determine the amount of drywall and insulation needed.

Benefits of Using a Multi-Family Building Drywall & Insulation Estimating Service

Drywall and insulation cost estimating is a crucial aspect of construction projects, and it offers several benefits for building owners, contractors, and architects. Here are some of the key benefits of drywall and insulation cost estimating:

Accurate Estimates

With accurate drywall and insulation cost estimates, building owners and contractors can better plan and budget for their construction projects. This helps prevent cost overruns and ensures that the project is completed within budget.
Save Cost

Drywall and insulation cost estimating can also help identify cost-saving opportunities. For example, by using alternative materials or optimizing the project timeline, costs can be reduced without compromising the quality or safety of the project.

Improved Quality

By providing accurate estimates of the materials and labor required for drywall and insulation installation, the project team can ensure that the project is completed to the highest standards of quality. This helps prevent mistakes, delays, and rework, ultimately resulting in a better final product.
Reduced Risk

Drywall and insulation cost estimating can also help reduce risk in construction projects. By identifying potential issues and challenges early on in the process, the project team can address them before they become more significant problems, reducing the risk of delays, additional costs, and other issues.
Transparency

By providing detailed cost estimates for drywall and insulation installation, building owners and contractors can ensure transparency in the project's expenses. This helps prevent misunderstandings or disagreements about the costs involved in the project, fostering better relationships between all parties involved.

Get Financing For Drywall Business

Maximize your drywall business’s potential with our competitive financing options

Types Of Drywall

Drywall comes in many different types, each with a different price point.

The cheapest drywall is standard 1/4” thick drywall, which is priced from $0.44-$0.52/sq. ft.

From there, the drywall goes up in thickness to 3/8, 1/2, and 5/8”, with an incremental increase in price ranging from $0.37-$0.61.

Moisture and fire-resistant drywall start in the $0.60+ range, but the most expensive type on the market is sound-proof drywall, which is $1.45-$2.65/sq. ft. before labor and markup.

Costs of Material

For material costs alone, you should expect to pay somewhere between 35 to 45 cents per square foot. Contractors may have negotiated discounts with local drywall supply stores or they may use The Home Depot® or Lowes® since these big box stores’ prices are very competitive, even compared to local material supply shops.

Material costs of somewhere between 35 to 38 cents per square foot should include not only the cost of the drywall itself but also the fasteners, glue, and other miscellaneous supplies. This may or may not include the cost of finishing materials.

Drywall Installation Cost by Type

Type	Cost per Sq.Ft. (Material Only)	Cost per Sq.Ft. (Installed)
Traditional / Standard	$0.52 – $0.60	$1.80 – $2.90
Plaster Blue Board	$0.86 – $0.98	$1.85 – $2.95
Fire-Rated (Type X)	$0.80 – $1.38	$1.90 – $3.90
Moisture-Resistant (Green)	$0.73 – $0.92	$1.85 – $3.25
Moisture-and-Mold-Resistant (Purple)	$0.74 – $0.85	$1.85 – $2.95
Eco-Friendly	$0.78 – $0.93	$1.90 – $3.90
Paperless	$0.83 – $1.52	$1.97 – $4.70
Soundproof	$2.58 – $3.65	$3.85 – $7.90

Batt & Roll Insulation Cost Estimator

Batt and roll insulation costs $0.90 to $2.80 per square foot installed or $1,400 to $4,300 total, depending on the R-value and project size. A roll of insulation costs $25 to $96 and covers 40 to 75 square feet. Labor costs $0.70 to $1.50 per square foot to install batt insulation.

Batt and roll insulation costs $0.90 to $2.80 per square foot installed, depending on the brand, material, and the required R-value of the insulated space.

Batt insulation cost factors

Factors that affect batt insulation cost include:

Size

Bigger spaces require more insulation material and labor.
Accessibility

Complex jobs like vaulted ceilings or hard-to-reach areas require more time and labor.
Additional supplies

Additional supplies required for installation cost $30 to $55 on average for every 1,000 square feet of insulation.
Faced vs. unfaced

Faced insulation is slightly more expensive and is typically used in first-time applications. Unfaced insulation is best when increasing the attic insulation or adding it between floors or interior walls for soundproofing.
Material

Rockwool batt insulation costs 40% to 50% more than fiberglass.
Brand

Batt insulation prices vary by manufacturer, including Owens Corning, CertainTeed, Johns Manville, and Knauf.
New construction vs. existing walls

Insulating new construction is typically cheaper due to ease of access.
Removing old insulation

Removing old insulation costs $1 to $3 per square foot.
A pest inspection costs $45 to $170 and is recommended before insulating an attic or crawl space. Pest extermination costs $135 to $200 per visit.
Asbestos removal costs $25 to $75 per square foot. Asbestos testing costs $300 to $850.

Attic spray foam insulation cost

Attic spray foam insulation costs $2.00 to $5.50 per square foot or $0.80 to $3.90 per board foot, depending on the type, R-value, and job size. Attic spray foam insulation costs $1,400 to $7,300 on average for the floor and $2,000 to $9,500 for the rafters and roof deck.

ATTIC SPRAY FOAM INSULATION COST
Location	Average cost installed
Attic floor	$1,400 – $7,300
Attic rafters/roof deck	$12,000 – $9,500

Structural insulated panels prices (SIPs)

Structural insulated panels (SIPs) cost $6 to $14 per square foot for the material alone, depending on the thickness. SIPs are large panels – 4′ x 8′ up to 8′ x 24′ – primarily used in new construction but sometimes installed at the rafters when converting an attic to a conditioned space.

An SIP consists of a rigid foam insulation center with a layer of plywood or oriented strand board (OSB) on each side.
SIPs have excellent R-value, soundproofing, and waterproofing properties.

Get Multi Family Building Drywall & Insulation Takeoff Service

We help Residential & Commercial Contractors to win more projects with higher accuracy.

Loose-fill attic insulation cost

Loose-fill attic insulation costs $2.00 to $3.50 per square foot installed on average. Loose-fill insulation is the same material as blown-in, but the labor cost is slightly higher to install.

Loose-fill works best for:

For obstructed or complex spaces
For attics with irregular joist spacing
For topping over existing insulation or filling gaps

Cost factors to install or replace attic insulation

Replacing attic insulation costs $3 to $8 per square foot, including $2 to $4 per square foot to remove the old insulation. Additional costs may be required for air sealing or encapsulating, cleaning, or making repairs in the attic:

Labor

Insulation labor costs $0.70 to $1.60 per square foot, depending on the material, R-value, conditions, and sealing and venting requirements.
Cleaning

Attic cleaning costs $140 to $570+. Costs increase when removing old insulation, relocating items, or addressing mold or pest issues.
Home Age

Older homes typically require more insulation and sealing.
Size

Larger attics require more material and labor. The cost per square foot may decrease on large-scale projects.
Existing Insulation

The current insulation condition impacts the insulation amount needed. Damaged insulation may require removal and replacement.
Roof vent installation costs $250 to $760. Vents exhausting into the attic must be vented outside before installing new insulation.
Roof leak repairs cost $550 to $1,400 on average.

Spray Foam insulation cost

Foam insulation is sprayed between your home’s wall studs and roof. It’s then protected by other materials, such as drywall or plywood. The foam provides an airtight seal to keep moisture from entering the house, plus additional insulation.

Spray foam insulation comes in two basic types: closed-cell and open-cell. Closed-cell insulation is an expanding plastic that forms an airtight seal. Open-cell spray foam insulation combines two liquids, a polyisocyanurate (ISO) and resin, that prevent air movement when sprayed together.

Closed-cell spray foam is more dense and protects against both moisture and hot and cold air. Open-cell has better fire protection qualities, but it doesn’t protect against moisture. Closed-cell spray foam costs $1.25 to $1.50 per square foot, while open-cell spray foam runs closer to $1.50 per square foot.

The foam itself is only a portion of your total cost. You may need additional materials, such as a cartridge gun, cartridges, and face shield, totaling around $900.

Checkout Our Video

Choose Your Trade & Get a Sample Project

Why Choose Us

You may save a lot of money on your project.
Our estimate reports are highly accurate.
We can make labour and material estimates in one or two days.
Estimate Florida Consulting provides 24X7 customer support.
Estimate Florida Consulting has worked with General Contractors, Sub Contractors, Developers, Architects, and Owners.
Our charges are very affordable.
Highly accurate concrete estimate and material takeoffs.
Our estimates have a bid winning ratio of more than 92 %.
Estimates are delivered in the fastest turnaround time (24 to 48 hours).
Our monthly takeoff packages save you 60% of the expense of a full-time estimator.
We have certified construction estimators with credible accreditations like AACE, AIQS.

Google Reviews

I used their services for estimation. I am really impressed with their services. Thank you for your good service.

 5/5

Process To Get Multi Family Building Drywall & Insulation Estimate Report

Here I am going to share some steps to get your multi-family building drywall and insulation estimate report.

You need to send your plan to us.

You can send us your plan on info@estimatorflorida.com
You receive a quote for your project.

Before starting your project, we send you a quote for your service. That quote will have detailed information about your project. Here you will get information about the size, difficulty, complexity and bid date when determining pricing.
Get Estimate Report

We do multi-family building drywall and insulation estimate and prepare a detailed report for your project. At last you finalize the report and finish the project.